多孔质节流空气静压轴承静态性能实验研究

本文采用不锈钢多孔质材料研制了一种新的空气静压轴承,并对不同平均孔径的多孔质空气静压轴承以及一种表面复合节流空气静压轴承的承载能力和刚度进行了实验测试和分析,结果表明,选用合适的不锈钢多孔质材料以及适当的加工方法可以制造高承载能力与高刚度的空气静压轴承。     

钛合金表面缺陷的激光熔覆修复研究

采用激光熔覆方法对钛合金试样表面缺陷进行修复,对修复结果进行反复测试,并与氩弧焊修复进行对比试验。试验结果表明,激光熔覆可实现对钛合金表面缺陷的有效修复,且各方面性能远高于氩弧焊修复。     

结合响应面法与网格法的低速翼型优化设计

本文首先了介绍响应面法和网格法的基本原理,翼型绕流场分析使用有限体积法空间离散和RUNGE-KUTTA时间迭代格式进行N-S方程计算,由翼型表面压力和摩擦力数值积分得到升力和阻力.然后,以NACA0012和GAw-1为算例,结合响应面法和网格法进行低速翼型的减阻优化设计,算例表明:在应用响应面法进行低速翼型优化时,采用...     

航空发动机设计图样典型标准化问题分析

结合航空发动机设计图样标准化检查的实际情况,针对基准、表面及其应用和尺寸标注2类典型标准化问题,对不同的图样标注形式进行了比较和分析,旨在探讨图样上该类标准化问题的合理正确表现形式,提高图样设计水平。     

无引线镀金表面贴装器件搪锡技术

针对无引线镀金表面贴装器件(如CLCC等封装类型器件)的手工智能焊台搪锡技术、手工锡锅搪锡技术、返修工作站搪锡技术进行了介绍和讨论,并比较了三种搪锡技术的性能特点,给出了适合无引线镀金表面贴装器件搪锡的最佳方案。     

脉冲等离子体源控制航天器表面充电电位的研究

在空间环境运行的航天器存在表面充电现象,而航天器表面充电引发的静电放电是导致航天器异常及故障的重要原因之一。因此,在航天器设计和应用中,必须对航天器表面电位采取必要的控制和防护措施。文章介绍了用脉冲等离子体源进行航天器表面充电电位主动控制的研究。通过模拟实验和实验数据分析,证实了用脉冲等离子体源能有效地控制航天器表面充...     

Sliding mode control of reaction flywheel-based brushless DC motor with buck converter

Reaction flywheel is a significant actuator for satellites’ attitude control. To improve output torque and rotational speed accuracy for reaction flywheel, this paper reviews the modeling and control approaches of DC-DC converters and presents an application of the variable structure system theory with associated sliding regimes. Firstly, the topology of reaction flywheel is constructed. The small signal linearization process for a buck converter is illustrated. Then, based on the state averaging models and reaching qualification expressed by the Lee derivative, the general results of the sliding mode control (SMC) are analyzed. The analytical equivalent control laws for reaction flywheel are deduced detailedly by selecting various sliding surfaces at electromotion, energy consumption braking, reverse connection braking stages. Finally, numerical and experimental examples are presented for illustrative purposes. The results demonstrate that favorable agreement is established between the simulations and experiments. The proposed control strategy achieves preferable rotational speed regulation, strong rejection of modest disturbances, and high-precision output torque and rotational speed tracking abilities.     

Evaluating the feasibility of GPS measurements of SSH on board a ship along the Portuguese West Coast

Aiming to validate coastal altimetry data, an exploratory experiment was carried out, using a survey ship with onboard GPS and motion compensation systems. The ship navigation plan followed a track as coincident as possible with the passage of two altimetry satellites, Envisat and Jason-1, along the Portuguese coast, in June 2007.     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

光线追踪求交算法的研究及其实现

本文对光线追踪求交算法进行了深入讨论。文中结合形体设计实例说明了此算法的正确性和实用性。